Home/Active Subwoofer/BASIS-14K Active Subwoofer

Technical Features
Cabinet Design: Heart-shaped directivity Frequency Response: 25Hz~120Hz (-6dB) Calibrated SPL (Output Level/PE = -14 dBu): 89 dB at 1m Maximum SPL (at 63Hz): ≥112dB at 1m Power Output: 1000W Driver Configuration: 1 x 15-inch Low-Frequency Drivers Nominal Input Level: -9 dBu to 6dBu (Adjustable) Input Impedance: Balanced, ≥10 kΩ Signal Inputs: 3 x XLR F3 Female Outputs: 3 x XLR 3M Male (for Low-Frequency Extension) Outputs: 1x Speakon NL4 (for connecting additional passive subwoofers) Input Voltage: 230V Dimensions: 550 x 500 x 430 mm (H x W x D) Net Weight: 37.8Kg
ME Geithain
BASIS-14K Active Subwoofer
¥70,700
/ OnlyCurrent Model: BASIS 14K· Current Color: Matte Black EnclosurePrice automatically adjusts based on model and color.
The ME BASIS 14K is an active subwoofer featuring a custom-developed long-excursion 15-inch bass driver designed for low-distortion reproduction. All BASIS 13K models feature cardioid directivity to minimize rearward room reflections. The "K Technology" we have successfully applied for years in three-way and four-way active speakers delivers over 10 dB of rearward attenuation. This allows for excellent room frequency response even in acoustically challenging environments, significantly simplifying subwoofer placement in the listening room. The unit is driven by a built-in 1000W PWM power module. An electronic limiter protects against driver overload. LED indicators on the rear panel display the status of the protection circuit and the operational state of the subwoofer. The distance between front speakers and the subwoofer can range from 0 to 1 meters, allowing for phase correction within this span. An activatable high-pass filter raises the lower cutoff frequency to 40 Hz. The cutoff frequency is continuously adjustable between 60 and 80 Hz. LFE channel transmission cuts off at 120 Hz. All control and power electronics, including all connection and operation interfaces, are integrated into the rear panel. All BASIS active speakers feature an output port on the rear panel to connect an additional passive subwoofer for increased power (doubling) and relaxed placement requirements. The system can also be switched to Bypass mode using a wired remote control. In this mode, all output channels connect directly to their respective input channels—the bass channel is disabled while the LFE channel remains active.
Genuine Products · Authorized Reseller
Select ModelBASIS 1 4K
Select ColorMatte Black Enclosure
Product Information
2 official documents
- BASIS-14K Active Subwoofer (Specs 1)
- BASIS-14K Active Subwoofer (Specs 2)
Specifications
| Type | Active subwoofer |
| Use Cases | Large & Medium Recording Studios / Mixing Control Rooms / Home Audio Systems |
| Origin | Germany |
| Detailed Specifications | Subject to attached official specifications. |



